Apple M4チップ搭載のMacBook AirやM3 Ultra/M4 Maxチップ搭載のMac Studio (2025)の温度センサーやファン制御に対応したシステムモニタアプリ「TG Pro v2.96」がリリース。

TG Pro v2.96 TG Pro
記事内に広告が含まれています。This article contains advertisements.
スポンサーリンク

 Apple M4チップ搭載のMacBook AirやM3 Ultra/M4 Maxチップ搭載のMac Studio (2025)の温度センサーやファン制御に対応したシステムモニタアプリ「TG Pro v2.96」がリリースされています。詳細は以下から。

TG Pro v2.95

 カナダTunabelly Softwareは現地時間2025年03月14日、Appleが新たに販売を開始したMacBook AirやMac Studio (2025)をサポートしたシステムモニタアプリ「TG Pro v2.96」アップデートをリリースしたと発表しています。

TG Pro v2.96

Added support for the following new Mac models in all configurations:

  • MacBook Air (15-inch, M4, 2025)
  • MacBook Air (13-inch, M4, 2025)
  • Mac Studio (M3 Ultra, 2025)
  • Mac Studio (M4 Max, 2025)

リリースノートより抜粋

 TG Pro v2.96ではApple M4チップ搭載のMacBook Airの温度センサーがサポートされたほか、Mac Studio (2022)から採用されている2基の冷却ファン制御と熱管理システムがサポートされたほか、

Mac Studioの冷却ファン

Mac Studioの冷却ファン

14コアM3 Maxチップの高性能コアの温度割当やMac mini M4のGPUクラスター名の最適化、MacBook Pro M4 MaxモデルでGPU温度が103℃を超えると、温度センサーの読み込みが正しく更新sれない問題、ストレージのSMART情報の不具合などが修正されているそうです。

TG Pro v2.96

 TG Proのシステム要件はmacOS 10.13 High Sierra以降のIntel/Apple Silicon Macで、価格は10ドル(50%OFF)となっていますが、14日間利用可能なトライアル版も公開されているので、新しいMac Studioを購入された方は試してみてください。

TG Pro v2.96

  • [New] Added support for the following new Mac models in all configurations:
    • MacBook Air (15-inch, M4, 2025)
    • MacBook Air (13-inch, M4, 2025)
    • Mac Studio (M3 Ultra, 2025)
    • Mac Studio (M4 Max, 2025)
  • [Improvement] Optimized the allocation of temperatures between CPU Performance clusters for M3 Max chips with a total of 14 cores.
  • [Improvement] Removed the “GX” (where X is a number) suffix from GPU Clusters on the Mac mini M4 for consistency with other models.
  • [Improvement] Added an extra safeguard to catch internal exceptions that may occur in the Paddle licensing service when using the option to free up an activation from a previous installation.
  • [Fixed] Resolved an issue where GPU temperatures exceeding 103°C on MacBook Pro M4 Max models could cause temperature readings to stop updating properly.
  • [Fixed] Disk SMART temperatures are now logged only if the temperature logging option is enabled.
  • [Fixed] Resolved a crash when checking drive temperatures via SMART if the hardware reported a temperature of 0°C or lower.
  • [Fixed] Addressed a potential crash when dragging an Auto Boost rule to a new location in the list.

コメント

タイトルとURLをコピーしました